14
Chapter 3: Setting up the Printer
Chapter 3: Setting up the Printer
Unpack the printer
Check the packing list
Save all packing materials in case you need to repack the
printer for shipping or storage. Before installation, check
that all the items on this list have been shipped (printers
shipped in bulk may not include all these items):
• Printer (enclosed in a plastic bag with foam pack)
• Test printout protecting the printhead (inside receipt
bucket)
• Cardboard support for cantilever (on slip table)
• Foam restraint for carriage (behind front cover)
• Power supply with cable connecting to printer and
power supply cord connecting to power outlet (only
if ordered with the printer)
• Ribbon cassette
• A760 ColorPOS
Two-Color Thermal Receipt and
®
Impact Slip Printer: Setup Guide
• RS-232C Communication cable from host to printer is
available if ordered with printer. Other cables must be
obtained by the user.
A760 Two-Color Thermal/Impact Hybrid Printer: User Guide
To report any missing materials, or to report a printer that
was damaged during shipping, call your supplier or call a
CognitiveTPG representative at:
Sales/General Information
Service/Operational Questions
– or –
You can visit our website at http://www.cognitivetpg.com
and contact us by email.
1
Click on "Contact Us"
on main page.
2 Fill in form information on window that comes up.
3 Send.
189-9200303 Rev. E
1(800)732–8950
1(800)732-8950,
option 4
12/2012