Connect The Cables; Cash Drawer Cables - CognitiveTPG A760 User Manual

Connect the cables

Cable connections are made at the back of the printer.
Caution: Connect the cables to the printer before applying power. The host computer should always be turned off before
connecting communication cables.
Warning! When instructed to connect the USB cable from the host to
the printer, be careful to plug it into the USB board connector only (A).
Do not insert the USB cable into the Cash Drawer connector (B) on the
left back of the printer. Damage to the printer could occur. If you are not sure
of your printer configuration, contact CognitiveTPG before proceeding.
CAUTION:
DO NOT plug the
USB cable here.
Back of printer
Parallel & Ethernet
connectors not shown
Note: Connector panel varies with printer configuration (parallel and ethernet connector versions not shown.)

Cash drawer cables

The cash drawer cable connects the printer to one or two
cash drawers.
Warning! Be careful to connect correct cable into printer
cash drawer connector.
1 Plug the cable into the cash drawer connector (standard
phone jack) located at the rear of the printer.
Note: If your system has two cash drawers, attach a
Y-cable to the printer's cash drawer connector as shown.
189-9200303 Rev. E
Cash drawer
connector
switches
12/2012
Chapter 3: Setting up the Printer
Strain
Power
relief
supply
connector
DIP RS-232C communication
connector
(9-pin shown)
�������
�����������������
���������������������
A760 Two-Color Thermal/Impact Hybrid Printer: User Guide
USB
connector
�������
����
������
����
������
19