Remove the packing restraints
���������
�������
1 Open the front cover, remove the foam restraint holding
the carriage (1).
2 Remove the cardboard support (2) from the slip path.
3 Open the receipt cover (3).
4 Remove the test printout. It is recommended that you
retain the test printout until the printer is successfully
installed
Continue to "Load or change the receipt paper on next
page...
189-9200303 Rev. E
�������
�����
������
����������
12/2012
Chapter 3: Setting up the Printer
�����
�����
��������
����
���������
����������
��������
����
��������
A760 Two-Color Thermal/Impact Hybrid Printer: User Guide
�������
�����
15