Installing or replacing the ribbon cassette
Change the impact printer's ribbon cassette if it is printing lightly or produces marks, lines or other inconsistent printing
on the receipt.
���������������
�������������������
Replacing a used ribbon cassette
1 Open the front cover (1) by grasping the cover on each
side at the bottom and swing up.
2 Pinch in tabs (2) of the old ribbon cassette and pull
to remove it.
3 Continue to "Installing a new ribbon cassette" step 2.
189-9200303 Rev. E
�����
�����
���
12/2012
Chapter 3: Setting up the Printer
��������
���
Installing a new ribbon cassette
1 Open the front cover (1) by grasping the cover on each
side at the bottom and swing up.
2 Unwrap the new ribbon cassette and tighten the ribbon
by turning the knob (3) on the cassette in the direction
of the arrow.
Caution: DO NOT remove the mylar shield.
3 Position the ribbon cassette onto the carriage, as shown
(4), making sure the ribbon is underneath the printhead.
4 Snap the cassette into place and snap the front cover
closed.
A760 Two-Color Thermal/Impact Hybrid Printer: User Guide
��������
�����
������
������
���������
17
����