Table of Contents
Advertisement
6
Chapter 3: Settng up the Printer
Chapter 3: Setting up the Printer
Getting Started
Before setting up the printer, be sure you read and understand each of the sections in this chapter. The sections are
presented in the order they should be performed.
Choose a location for the printer
The A776II printer may be set on or near the host
computer. With the RS-232C interface, you can place the
printer up to 50 feet from the host computer and power
supply, and 15 feet with a USB interface. Try to protect
the printer from getting dusty, and make sure it is safe
from having any liquid spilled on it.
Place the printer on a level surface, and make sure there
is enough room to open the receipt cover to change the
paper and to open the front cover to change the impact
printer's ribbon cassette.
A776II Two-Color Thermal/Impact Hybrid Printer: User Guide
11.4"
A776 Dim left side.eps
Be sure to leave enough space behind the printer to
access the cables.
If the printer has a built in Magnetic Ink Character
Recognition (MICR) check reader, you may need to make
additional adjustments to the printer's location.
Devices such as computer monitors or large metal
surfaces can affect the printer's magnetic field and cause
intermittent check reading errors. Be sure to place the
printer away from sources of interference.
6.6"
6.5"
A776 2UG0001 B 11/2016
Advertisement
Table of Contents
