The Slip/LED sensors use a reflective photo sensor.
• Do not use paper that has holes or is translucent at
the Slip/LED sensor location. (See "A" in above
illustration.)
189-9200303 Rev. E
����������
���������
12/2012
Chapter 5: Paper and Supplies
����
����
������
����
��������
������
���������
�����
�����
��������
����
��������
����
��������
����
����
���������������
��������������
����������������
�
�
•
Do not use paper that has holes on dark areas with low
reflection (less than 60% reflection) at the slip sensor
location. (See "B" in above illustration.)
•
Thin paper should be used between the top and bottom
sheets of multi-ply paper. Thick paper reduces the
copy capability.
A760 Two-Color Thermal/Impact Hybrid Printer: User Guide
49