Transom Trim Switch - Regal 2000 ES Owner's Manual

Chapter 6

TRANSOM TRIM SWITCH

remove the keys from the ignition switch when engine is not run-
ning. Make sure nobody is near the stern drive when using the tilt
switch. Make sure the stern drive unit is in a complete down position
before starting the engine. Failure to do so may result in stern drive
component damage.
6-38
A stern drive trim switch may
be located on the transom. It
permits tilting the stern drive
in the "up" or "down" positions
from the stern of the boat. Note
that this switch travels a com-
plete up and down cycle from
the lowest down trim position
to an up trailer position. Always