Regal 2000 ES Owner's Manual page 257

Chapter 7
VOLVO SX PROPELLER INSTALLATION
It is advantageous to carry the needed tools to change propellers
and approved lubricants to be used on the propsha . is method
provides a safety margin from sharp blades especially those with
stainless steel propellers. Wear gloves when changing the propeller.
A 2" x 4" piece of wood placed across the ventilation plate allows
safer removal of the propeller as the wood holds the blades from
moving while removing and installing hardware.
With propeller units you may need to add a shim to the 2" x 4" piece
of wood to remove the propeller safely. Always consult the engine
manufacturer's owner's manual for further detailed information.
Typical Propeller Change
TYPICAL VOLVO PROPELLER INSTALLATION
1. To install a propeller on a Volvo equipped propulsion package:
2. Coat the propeller sha with the recommended marine lubricant.
3. Place the thrust bushing on the prop sha with inner taper toward
the gear case to match the taper on the propeller sha .
7-12