Regal 2000 ES Owner's Manual page 111

Control
Your vessel uses a single side-mount control to operate the stern
drive on your Regal.
can shi into are forward, reverse, and neutral (straight up).
3
2
1
4
Typical Control Lever In Neutral Position
1) Neutral Release Buttons 3) Control Lever
2) Trim Control Switch
To help visualize the operating principles, we have used a clock
mode on the next page.
indented in the neutral position. In order to start the engine, your
control lever must be in the 12 o' c lock neutral position.
Engine & Controls
e three positions the remote control lever
Button under control handle (3)
must be pulled up simultaneously
along with pushing button (1) in to
engage throttle only neutral posi-
tion.
4) Safety Lanyard
e lever in the straight up position is
3-33