Step 1. To Set Up The Equipment - HP 54620A User's And Service Manual

Testing, Adjusting, and Troubleshooting the Analyzer

Step 1. To set up the equipment

Step 1. To set up the equipment
Turn on the test equipment and the logic analyzer. Let them warm up
1
for 30 minutes before beginning the test.
Set up the function generator.
2
Set up the function generator to provide a DC offset voltage at the
a
Main Signal output.
Disable any AC voltage to the function generator output, and enable
b
the high voltage output.
Monitor the function generator DC output voltage with the
c
multimeter.
170