Field Service Ver. 2.0 Jun. 2010
16.2.2
Scanner section: Black copy
A. Typical faulty images
B. Troubleshooting procedure
Step
1
Exposure lamp turns ON when the power switch is turned
ON.
2
Exposure lamp is abnormally lit (flickers or abnormally
dark) when the power switch is turned ON.
3
CIS module (CIS) connector is loose.
4
Printer control board (PRCB) connector P102 is loose.
Check
16. IMAGE QUALITY PROBLEM
A09AF3C523DA
Result
Action
NO
Go to step 3.
NO
Go to step 4.
YES
• Reconnect.
YES
• Reconnect.
NO
• Change PRCB.
• Change CIS.
141