Konica Minolta bizhub 164 Service Manual page 63

4. PERIODICAL MAINTENANCE PROCEDURE
[4]
[2]
1
26
1
[1]
[3]
A0XXF2E514DA
[1]
A0XXF2E013DA
[1]
A0XXF2E544DA
Field Service Ver. 2.0 Jun. 2010
4. Remove two screws [1] in the rear of
the imaging unit.
5. Remove three screws [2] at the front
of the imaging unit.
6. While slightly pulling the area below
the drum (diagonally shaded area) in
the direction of arrow, separate the
drum unit [3] from the developing unit
[4].
7. Using a cleaning pad with alcohol,
wipe the pre-image transfer upper
guide plate [1] clean of dirt.
8. Using a cotton bud dampened with
alcohol, clean the groove [1] inside
the pre-image transfer upper guide
plate.