Dos Module - Miele PG 8056 Operating Instructions Manual

Siphon markings
Connecting DOS
modules

DOS module

In addition to the internal dispensing systems, up to two additional
external dispensing systems (DOS modules) can be connected for
dispensing liquid process chemicals.
For more information on Miele DOS modules, please contact your
Miele dealer or Miele Service.
Liquid process chemicals from external containers are supplied by
siphons. The siphons are color-coded to help ensure proper
dispensing.
Miele uses and recommends the following colors:
Blue: for detergent
Red: for rinse aid
For cleaning specific types of soiling, and for information on the best
detergents and additives to use for liquid dispensing, please contact
Miele Service.
The DOS module comes with a separate installation manual.
 Power supply connection for DOS 1, detergent.
 Power supply connection for DOS 4, rinse aid.
 Connections for dispensing hoses.
 Before installing the DOS module, compare the connection data
(voltage and frequency) on the module's data plate with the
information on the data plate of your dishwasher. If the information
does not match, the module may become damaged. When in
doubt, consult an electrician.
Connect the module to the electrical supply.

To connect a dispensing hose, release the hose clip on a free

connector and remove the safety cap.
Push the dispensing hose onto the connector and secure it with a

hose clip.
Operation
45