Additional Functions; Delay Start - Miele PG 8056 Operating Instructions Manual

Setting the
start time

Delay Start

You can schedule the start time of a program in advance. The start
time can be delayed by 1 minute to 24 hours.
The Delay Start function must be enabled in the Settings menu (see
"Settings , Delay Start").
If Delay Start is disabled, the function will not appear in the
"Additional functions" screen.
When using the Delay Start function together with powder
detergent, make sure that the detergent dispenser is dry before
adding the detergent. Wipe dry with a cloth if necessary.
If the compartment is wet, detergent can clump up and stick to the
dispenser, which may prevent the detergent from being fully
dispensed.
Turn the dishwasher on using the  button.

Select the desired program (see "Operation, Selecting a program").

The LED for the Start/Stop button will flash.
Press the OK button.

Start time
-- : --
Use the arrow buttons  (higher) and  (lower) to set the hours and

minutes, and confirm each entry using the OK button.
After entering the start time, press the Start/Stop button.

Normal plus
Temperature
Turn on at
The selected program, along with the temperature and start time, will
then be displayed.
To cancel the entered Delay Start setting before the program starts,
turn the dishwasher off using the  button.

Additional functions

55 °C
12:30
55