Important Safety Instructions; Proper Installation; Technical Safety - Miele PG 8056 Operating Instructions Manual

Commercial dishwasher
Table of Contents

Advertisement

IMPORTANT SAFETY INSTRUCTIONS

8

Proper installation

The installation and operation of this commercial dishwasher in
non-stationary locations (for example, aboard ships) should only be
performed by professional operations or individuals, if they ensure
that the preconditions for safe use of this appliance have been met.
When installing the commercial dishwasher, ensure it is properly
secured.
Failure to observe the above could cause injuries and damage to the
commercial dishwasher and other equipment or installations.
The commercial dishwasher must be fastened to the floor using
the BBF 80 floor fastening kit.
Do not install the commercial dishwasher in areas at risk of
explosion or freezing.
In order to reduce the risk of damage from condensation, the
furniture in the area around the commercial dishwasher should be
designed for commercial use.

Technical safety

The commercial dishwasher must only be installed, commissioned,
repaired and then maintained by the Miele Service Department or an
authorized Miele Service dealer. Installation, repair and other work by
unqualified persons could be dangerous and Miele will not be held
liable.
This commercial dishwasher must only be operated by
appropriately trained personnel. They must be instructed and trained
regularly.
Before using the commercial dishwasher, check it for any
externally visible damage. Under no circumstances should you use it
if it has been damaged. It could be dangerous.
In the event of a damaged or leaking commercial dishwasher, turn
it off immediately and contact Miele or an authorized Miele Service
dealer.
Faulty components may only be replaced by genuine Miele original
parts. Only when these parts are fitted can Miele guarantee the safety
standards of the appliance.
The electrical safety of this commercial dishwasher can only be
guaranteed when it is connected to a correctly installed grounding
conductor system. If in any doubt, please have the electrical
installation tested by a qualified electrician. Miele cannot be held
liable for the consequences for the lack or interruption of a grounding
conductor (e.g. electric shock).
Be sure to follow the installation instructions in this manual and in
the installation diagram.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents