Miele PG 8056 Operating Instructions Manual page 9

IMPORTANT SAFETY INSTRUCTIONS

Ensure that the connection data on the data plate (voltage,
frequency, and fuse rating) match those of your electrical supply.

There must be no electrical sockets behind the commercial
dishwasher since the depth of the installation niche may be too small
and there is a danger of overheating if the dishwasher is pushed up
against a plug (see the "Electrical connection" chapter for more
information).

Do not connect the dishwasher to the electrical supply by a
multiple outlet box or an extension cable since they do not guarantee
the required safety of the appliance (e.g. danger of overheating).

Do not open the commercial dishwasher casing under any
circumstances. Tampering with electrical connections or components
and mechanical parts is highly dangerous to the user and can cause
operational faults.

The commercial dishwasher must not be used if the connecting
cable is damaged. If the cable is damaged, it must be replaced with a
special connecting cable available from Miele. For safety reasons, this
may only be performed by the Miele Service Department or an
authorized Miele Service dealer.

Before maintenance, disconnect the commercial dishwasher from
the electrical supply.

The plastic housing of the water connection contains electrical
components. It must not be dipped in water.

There are live wires in the water intake hose. Do not shorten the
water intake hose, even if it is too long.
9