Dos Module - Miele PG 8058 Operating Instructions Manual

Labelling the
siphons
Connecting DOS
modules

DOS module

In addition to the internal dispensing systems, up to two further
external dispensing systems (DOS modules) can be connected for
dispensing liquid chemical agents.
For more information on Miele DOS modules please contact your
Miele dealer or the Miele Professional Department.
Liquid chemical agents from external containers are dispensed by
siphons. Colour coding the siphons can be helpful for correct
dispensing.
Miele use and recommend:
Blue: for cleaning agent
Red: for rinsing agent
For cleaning specific types of soiling, and for information on the
optimum cleaning agents and additives to use for liquid dispensing,
please contact the Miele Professional Department.
The DOS module is supplied with its own installation instructions.
 Power supply for DOS 1, cleaning agent.
 Power supply for DOS 4 rinsing agent.
 Connections for dispensing hoses
 Before fitting the DOS module compare the connection data
(voltage and frequency) on the data plate with that on the data
plate of your machine. If the data does not match, the module
could sustain damage. If in any doubt, consult an electrician.
Connect the module to the electricity supply.

To connect the dispensing hose, release the hose clip on a free

connector and remove the safety cap.
Push the dispensing hose onto the connector and secure it with a

hose clip.
Unused connectors must be blanked off with safety caps to
prevent the leakage of wash fluid.
Operation
47