Oem Responsibilities For All Products Containing The Enabler Iii-G Module - Enfora Enabler III-G Integration Manual

Enfora Enabler III-G
Modem Integration Guide

13.8.1. OEM Responsibilities for All Products Containing the Enabler III-G module

In addition to any other regulatory requirements, OEMs and integrators must include or provide
the following information, instructions, warnings and labels with any device or product into which
the Enfora Enabler III-G GSM1900 GSM transceiver has been incorporated:
Information Description
Detailed The OEM must provide an operating/installation manual with the final
Operating product which clearly indicates that these operating conditions and
Instructions for restrictions must be observed at all times to ensure compliance with current
ensuring FCC guidelines which limit human exposure to radio frequency radiation.
compliance with 20 cm (7.87 inch) separation distance between the antenna and all persons
current FCC must be maintained at all times for all fixed and mobile products and
guidelines which applications
limit human Portable devices and applications are prohibited unless such devices and
exposure to radio products are specifically authorized by the FCC
frequency Maximum antenna gain is limited to 2 dBi* in mobile products and
radiation applications
For fixed applications (2 meter separation) the antenna gain can be as
much as 26 dBi.
Modifications and/or additions to the Enfora Enabler III-G GSM transceiver,
including use of antennas with higher gain than those authorized by the
FCC, are prohibited
*dBi = antenna gain in dB relative to an isotropic radiator
Attach the following warning label
Antenna directly to or displayed next to the
Avoidance antenna. Furthermore, this label must
Label be visible to and easily readable by all
persons in the immediate vicinity of the
antenna
Human Exposure Include the following statement in the
instruction / operation manual.
Compliance
Statement
GSM0308PB001
To comply with FCC RF
exposure requirements, a
separation distance of 20 cm
(7.87") or more must be
maintained between this
antenna and all persons
Enfora certifies that the Enfora
Enabler III-G ™ MHz GSM Radio
Module (FCC ID: MIVGSM0308)
complies with the RF hazard
requirements applicable to
broadband PCS equipment
operating under the authority of
47 CFR Part 22 or Part 24,
Subpart E of the FCC Rules and
Regulations.
This certification is contingent
upon installation, operation and
use of the
Enfora Enabler III-G module and
its host product in accordance
with all instructions provided to
both the OEM and end used.
When installed and operated in a
manner consistent with the
instructions provided, the Enfora
Enabler III-G module meets the
Version DRAFT – 2/9/2007
87
WARNING