Format For The At Commands - Enfora Enabler III-G Integration Manual

Enfora Enabler III-G
Modem Integration Guide

9.2. Format for the AT Commands

The general format of the command line is: <prefix> <command> <CR>
<prefix>
<command>
<CR>
The prefix AT obtains synchronization, identifies the character parameters, and indicates that a
command may be in the following characters.
AT commands are not case sensitive: use either capital letters or lower-case letters for the AT
command.
Note: Some AT Command parameter values ARE case sensitive and are documented in the
Enfora Enabler-IIG AT Command Set Reference - GSM0107PB001MAN.
GSM0308PB001
AT
See AT Command
Manual
0X0D
64
Version DRAFT – 2/9/2007