Table of Contents
Advertisement
Transition Guide
Ver. 1.00
3.4 Regulation and Compliance Differences
Enabler II-G GCF Approval (Formerly FTA)
The Enfora Enabler II-G module is type approved in accordance with the requirements of
and through the procedures set forth by the GSM industry association. The relevant
conformance specification is GSM 11.10-1 for GSM 850, 900, and 1800 MHz devices.
For PCS 1900 MHz devices, the relevant standard is PCS 11.10, a version of GSM 11.10-
1 that has been modified as appropriate for the North American GSM market. For
applications that use an unmodified version of the Enfora Enabler II-G module, further
testing in this area may not be required. Any OEM changes in the SIM interface, antenna
port, software or the physical makeup of the unit may require an incremental FTA to
ensure continued compliance with the above-mentioned standards. For more information
concerning type approval, please contact Enfora.
Enabler II-E GCF and PTCRB Approval
The Enfora Enabler II-E module is type approved in accordance with the requirements of
and through the procedures set forth by the GSM industry association. The relevant
conformance specification is TS 51.010-1. For applications that use an unmodified
version of the Enfora Enabler II-E module, further testing in this area may not be required.
Any OEM changes in the SIM interface, antenna port, software or the physical makeup of
the unit may require an incremental delta FTA to ensure continued compliance with the
above-mentioned standard. For more information concerning type approval, please
contact Enfora.
EDG0100TG001
Page 11
Rev. 1.00 – 11/03/2005
Advertisement
Table of Contents
