Introduction; Product Overview; Key Features Of The Enabler Iii Module - Enfora Enabler III-G Integration Manual

Enfora Enabler III-G
Modem Integration Guide

4. Introduction

4.1.

Product Overview

Enfora Enabler III-G modem is a compact, wireless OEM module that utilizes the Global System
for Mobile Communications (GSM) and GPRS (General Packet Radio Services) international
communications standard to provide two-way wireless capabilities via GSM services. The Enfora
Enabler III-G module is a fully Type-approved GSM/GPRS device, enabling application-specific,
two-way communication and control.
The small size of the Enfora Enabler III-G module allows it to be integrated easily into the
application and packaging.
4.2.

Key Features of the Enabler III Module

The following table summarizes the main features of the Enfora Enabler III-G Radio Module.
Interface Data input/output interface
Primary serial port
Secondary serial port
GPIO
USB
I2C
SPI Port
Keyboard
Audio
Voice
Antenna Interface
Command protocol
Subscriber Identification Module
(SIM)
Voltage backup
Reference clock
ADC
Optional remote SIM
Power Electrical power
Peak currents and average
power dissipation
Radio Features Frequency bands
GSM/GPRS features supported
GSM0308PB001
100 position 0.4mm pitch connector
V.24 protocol, 1.8V levels, full 9-pin, UART
implementation
V.24 protocol, 1.8V levels (debug only)
20 pins available (feature specific on some lines)
USB full-speed (FS) device compatible with the
Universal Serial Bus Specification Revision 2.0
and the universal Serial Bus Specification
Revision 1.1.
Multi- Master Serial Computer Bus
Serial Peripheral Interface
5 x 5 keyboard support
Digital audio via MCSI port
Supports four vocoder modes: full-rate (FR),
enhanced full-rate (EFR), half-rate (HR), and
adaptive multi-rate (AMR)
ultra Miniature Coaxial Interconnect or B2B Spring
contact
Enfora Packet API, GSM AT command set
Optional 1.8/3 V mini-SIM carrier and interface on
board with SIM detect
Voltage backup pin available to maintain RTC,
battery capable
32kHz and 13 Mhz. output reference clocks
1 ADC port
Accessible via the 100-pin connector
3.3 to 4.5 Vdc
Refer to the Operating Power table in the
Technical Specifications for peak currents and
average power dissipation for various modes of
operation.
EGSM 900, GSM1800, GSM 850 and GSM 1900
capability.
Provides for all GSM/GPRS authentication,
encryption, and frequency hopping algorithms.
GPRS Coding Schemes CS1-CS4 supported.
Multi-Slot Class 10 (4RX/2TX, Max 5 Slots).
Version DRAFT – 2/9/2007
8