Lexmark MX310 User Manual page 185

Troubleshooting
For non‑touch‑screen printer models, press
to clear the message and continue printing.
If you do not want to accept these risks, then remove the third-party supply or part from your printer and
install a genuine Lexmark supply or part.
Note: For a list of supported supplies, see the "Ordering supplies" section or go to www.lexmark.com.
Not enough free space in flash memory for resources [52]
Try one or more of the following:
•
From the printer control panel, select Continue to clear the message and continue printing. For
non‑touch‑screen printer models, press
•
Delete fonts, macros, and other data stored in the flash memory.
•
Upgrade to a larger capacity flash memory card.
Note: Downloaded fonts and macros that are not previously stored in the flash memory are deleted.
PPDS font error [50]
Try one or more of the following:
•
From the printer control panel, select Continue to clear the message and continue printing. For
non‑touch‑screen printer models, press
•
If the printer cannot find the requested font, then from the printer control panel, navigate to:
PPDS menu > Best Fit > On
The printer will find a similar font and reformat the affected text.
•
Cancel the current print job.
Printer had to restart. Last job may be incomplete.
From the printer control panel, touch
printer models, press
For more information, visit
Reinstall missing or unresponsive cartridge [31.xy]
Try one or more of the following:
•
Check if the toner cartridge is missing. If missing, then install the toner cartridge.
For information on installing the toner cartridge, see the "Replacing supplies" section.
•
If the toner cartridge is installed, then remove and reinstall the unresponsive toner cartridge.
Note: If the message appears after reinstalling the supply, then replace the toner cartridge. The
cartridge may be defective or a non‑genuine Lexmark supply. For more information, see
genuine Lexmark parts and supplies" on page
and
to clear the message and continue printing. For non‑touch‑screen
to confirm.
http://support.lexmark.com
on the control panel simultaneously for 15 seconds
to confirm.
to confirm.
or contact customer support.
156.
185
"Using