Understanding the printer menus
Use
Content Source
Black/White Laser
Color Laser
Inkjet
Photo/Film
Magazine
Newspaper
Press
Other
Sides (Duplex)
1 sided to 1 sided
1 sided to 2 sided
2 sided to 1 sided
2 sided to 2 sided
Paper Saver
Off
2‑up Portrait
2‑up Landscape
4‑up Portrait
4‑up Landscape
Print Page Borders
On
Off
Collate
(1,1,1) (2,2,2)
(1,2,3) (1,2,3)
To
Specify how the original document was produced.
Note: Black/White Laser is the factory default setting.
Specify whether an original document is two‑sided or one‑sided, and then
specify whether the copy should be two‑sided or one‑sided.
Notes:
•
The ADF scans only one side of the sheet.
•
1 sided to 1 sided is the factory default setting. This setting is selected
when using a one‑sided original document for a one‑sided copy job.
Copy two or four sheets of a document on one page.
Note: Off is the factory default setting.
Specify whether a border is printed.
Note: Off is the factory default setting.
Stack the pages of a print job in sequence when printing multiple copies.
Note: (1,2,3) (1,2,3) is the factory default setting.
117