Lexmark MX310 User Manual page 115

Understanding the printer menus
Use
Timeouts
Wait Timeout
Disabled
15–65535
Error Recovery
Auto Reboot
Reboot when idle
Reboot always
Reboot never
Error Recovery
Max Auto Reboots
1‑20
Print Recovery
Auto Continue
Disabled
5–255
Print Recovery
Jam Recovery
On
Off
Auto
Print Recovery
Jam Assist
On
Off
Print Recovery
Page Protect
Off
On
Accessibility Settings
Speech Rate
Very Slow
Slow
Normal
Fast
Faster
Very Fast
Rapid
Very Rapid
Fastest
To
Set the time the printer waits to receive for more data before
canceling a print job.
Notes:
•
40 seconds is the factory default setting.
•
Wait Timeout is available only when the printer is using
PostScript emulation.
Automatically reboot the printer.
Note: Reboot always is the factory default setting.
Determine the number of automatic reboots the printer can
perform.
Note: 2 is the factory default setting.
Let the printer automatically continue printing from certain
offline situations when these are not resolved within the
specified time period.
Note: Disabled is the factory default setting.
Specify whether the printer reprints jammed pages.
Note: Auto is the factory default setting. The printer reprints
jammed pages unless other tasks need the memory required
to hold pages.
Set the printer to check for jammed paper.
Note: On is the factory default setting.
Set the printer to print the correct output for a page.
Note: Off is the factory default setting.
Adjust the Voice Guidance speaking rate.
Note: Normal is the factory default setting.
115