Faxing
Sending a fax
Sending a fax using the printer control panel
1
Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Notes:
•
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as
magazine clippings) into the ADF tray. Place these items on the scanner glass.
•
The ADF indicator light comes on when the paper is loaded properly.
2
If you are loading a document into the ADF tray, then adjust the paper guides.
3
From the printer control panel, navigate to:
> Fax >
> enter a fax or shortcut number on the keypad >
Note: If you want to fax another document, then place it on the scanner glass, press the left or right arrow
button to scroll to Scan the Next Page, and then press
4
Press the left or right arrow button to scroll to Finish the Job, and then press
Sending a fax using the computer
For Windows users
1
From the document that you are trying to fax, open the Print dialog.
2
Select the printer, and then click Properties, Preferences, Options, or Setup.
3
Click Fax > Enable fax, and then enter the recipient fax number or numbers.
4
If necessary, configure other fax settings.
5
Apply the changes, and then send the fax job.
Notes:
•
The fax option is available only with the PostScript® driver or the Universal Fax Driver. For more
information, go to http://support.lexmark.com.
•
To use the fax option with the PostScript driver, configure and enable it in the Configuration tab.
For Macintosh users
1
With a document open, choose File > Print.
2
Select the printer.
3
Enter the recipient fax number, and then configure other fax settings, if necessary.
4
Send the fax job.
> Original Size >
.
.
83