Table of Contents
Advertisement
Chapter 8
Routine Procedures
CA and User Certificate Procedures (Host-Based EAP Only)
Follow the instructions in this section to view or remove CA and user certificates for use with EAP-TLS
or PEAP authentication.
Note
Refer to
Viewing CA and User Certificates
Follow the steps below to view details about the CA and user certificates for your Windows CE device.
Step 1
Select Start > Programs > Cisco > CertMgr. The Certificate Manager screen appears (see
Figure 8-6
Step 2
Select Trusted Authorities (if you want to view a CA certificate) or My Certificates (if you want to
view a user certificate) in the Certificate drop-down menu.
Step 3
Select the certificate that you want to view.
Step 4
Tap the View button. A screen appears that enables you to access information about the certificate,
including its issuer, expiration date, and serial number.
OL-1375-03
Chapter 5
for instructions on obtaining CA and user certificates.
Certificate Manager Screen
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE
CA and User Certificate Procedures (Host-Based EAP Only)
Figure
8-6).
8-11
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
