Cisco AIR-PCM341 Installation And Configuration Manual page 102

Error Messages
Error Message Cisco Wireless LAN Adapter Not Found!
Explanation
device, or the client adapter was ejected while ACU was running. WLM cannot execute if a client
adapter is not running because it needs to be able to read from and write to the adapter.
Recommended Action
Windows CE device.
Error Message Client adapter not found.
Explanation
Recommended Action
necessary, reset the Windows CE device.
Error Message The combination of the domain name and user name is too long. It exceeds
the maximum of 255 characters allowed. Please use shorter ones.
Explanation
Password screen exceeds the maximum number supported by PEAP, which is 255.
Recommended Action
characters.
Error Message Could NOT find all of the appropriate files for this installation. Make
sure that all of the files are installed to the same directory.
Explanation
Recommended Action
to a folder, making sure that you keep all of the extracted files together in the one folder.
Error Message File not valid for this radio! Firmware Upgrade Failed!
Explanation
selected. The firmware file should have a .img extension.
Recommended Action
Error Message First Authentication Attempt Timed Out. Radio Will Continue Trying.
Explanation
out of range of an access point. The client adapter continues trying to authenticate.
Recommended Action
of the following: 1) move the Windows CE device closer to an access point so that WLM will
continue trying to authenticate or 2) enter a different saved or temporary LEAP username and
password.
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE
9-6
ACU or WLM was activated without a client adapter being inserted in the Windows CE
Tap OK to acknowledge the message on WLM. Insert a client adapter into the
A client adapter is not inserted in the Windows CE device.
Insert a client adapter if you want to start wireless communications. If
The combination of characters entered for the username and domain name in the Static
Enter a set of credentials (username, password, and domain name) with fewer
Some of the client adapter installation files could not be found.
Download the WinCE-PCMCIA-LMC-v230.exe file again and extract its files
Your attempt to upgrade the client adapter firmware failed because an invalid file was
Tap the Browse button and select a new firmware image file.
The client adapter timed out while trying to LEAP authenticate, possibly because it is
Tap OK to acknowledge the message and terminate WLM. Then perform one
Chapter 9 Troubleshooting
OL-1375-03