Cisco AIR-PCM341 Installation And Configuration Manual page 89

Chapter 8 Routine Procedures
Step 4 Select Option #2: Aironet Wireless Software Display Tables.
Note
Step 5 Select Cisco Aironet Wireless LAN Client Adapters.
Step 6 Find the section for client adapter firmware.
Step 7 Select the link for your client adapter's series (for example, 350 Series).
Select the firmware file for your client adapter.
Step 8
Read and accept the terms and conditions of the Software License Agreement.
Step 9
Select the firmware file to download it.
Step 10
Save the file to a floppy disk or to the hard drive of your laptop or PC.
Step 11
Locate the file using Windows Explorer, double-click it, and extract the image file (*.img) to a folder.
Step 12
Step 13 In the ActiveSync window on the laptop or PC, click the Explore button to view the files on the Windows
CE device.
Step 14 Drag and drop the firmware image from Windows Explorer to a location in the ActiveSync window.
Note
Step 15 After the file is copied, disconnect the Windows CE device.
Step 16 Make sure the client adapter is installed in your Windows CE device and is operational.
On your Windows CE device, open ACU and tap the Firmware tab. The Firmware screen appears (see
Step 17
Figure
Step 18 Tap the Browse button. The Open window appears (see
OL-1375-03
You can download software from the Software Selector tool instead of the display tables. To
do so, select Option #1: Aironet Wireless Software Selector, follow the instructions on the
screen, and go to Step 9.
If your Windows CE device is a PPC running Windows CE 3.0, you must copy the firmware
image to the My Documents folder or a folder under My Documents.
8-2).
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE
Upgrading the Client Adapter Software
Figure 8-3).
8-5