Make A Conference Call From Your Analog Phone; Host A Meet Me Conference On Your Analog Phone; Shared Lines On Your Analog Phone - Cisco ATA 191 User Manual

Make a Conference Call from Your Analog Phone

Make a Conference Call from Your Analog Phone
Procedure
Step 1 While on an active call, perform a hook flash.
This puts the call on hold and you hear dial tone.
Step 2 Dial a second number and wait until that person answers.
Step 3 To create the conference, perform a hook flash.
You are now in a conference with both persons.

Host a Meet Me Conference on Your Analog Phone

This feature allows you to host a Meet-Me conference in which other participants call a predetermined number
at a scheduled time.
Procedure
Procedure
Step 1 Pick up the phone handset.
Step 2 Press **5 > room ID > #.
Step 3
Other parties can join a Meet-Me conference by dialing the meeting number directly.

Shared Lines on Your Analog Phone

You can share the same phone number with one or more of your coworkers. For example, as an administrative
assistant, you may be responsible for screening calls for the person that you support.
You can also have multiple phones that share the same number.
When you share a phone number, you can use that phone line just like any other line. Keep in mind a few
special characteristics about shared lines:
• The shared phone number appears on all phones that share the number.
• Shared lines can barge into an active call:
• With the privacy feature, if you share a line with other people, you can prevent them from adding
Cisco ATA 191 User Guide for Cisco Unified Communications Manager
18
◦ If autobarge is enabled, the shared line going off-hook triggers cBarge.
◦ If autobarge is disabled, the shared line dials **6 to trigger cBarge.
themselves to your call.
Calls