Disabling Leap; Using Host-Based Eap - Cisco AIR-PCM341 Installation And Configuration Manual

Chapter 5 Configuring the Client Adapter
Step 2 Perform one of the following:
•
•
Tap OK to enable LEAP.
Step 3
Refer to the
Step 4

Disabling LEAP

Follow the steps below if you ever need to disable LEAP for a particular profile.
Double-tap the ACU icon or select Start > Programs > Cisco > ACU. The Profiles screen appears.
Step 1
Select the profile that you want to change from the Manage Profiles box and tap the Edit button.
Step 2
Select Network Security Type under Property and None from the list of options in the Value box.
Step 3
Step 4 Tap OK to save your changes.

Using Host-Based EAP

Before you can enable host-based EAP authentication, your network devices must meet the following
requirements:
•
•
•
•
OL-1375-03
If you want to use a temporary username and password (which must be entered whenever a LEAP
profile is selected, the client adapter is ejected and reinserted, or the Windows CE device is reset in
order to authenticate and gain access to the network), go to
If you want to use a saved username and password (which do not need to be entered whenever a
LEAP profile is selected, the client adapter is ejected and reinserted, or the Windows CE device is
reset because authentication occurs automatically as needed using your saved credentials), enter
your LEAP username, password, and optional domain name in the User Name, User Password, and
User Domain edit boxes.
"Using LEAP" section on page 6-2
The Windows CE device must be a PPC 2002 device.
Support for EAP-TLS and PEAP authentication will be available for Windows CE .NET
Note
devices in a future release.
Client adapters must support WEP, and firmware version 5.02.19 or greater is recommended.
Access points to which your client adapter will attempt to authenticate must use the following
firmware versions or greater: 11.23T (340 and 350 series access points), 12.2(4)JA (1100 series
access points), or 11.54T (1200 series access points).
All necessary infrastructure devices (for example, access points, servers, gateways, user databases,
etc.) must be properly configured for the authentication type you plan to enable on the client.
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE
Step 3.
for instructions on authenticating using LEAP.

Using Host-Based EAP

5-17