Feeder Control; Limits; Load Cells - MERRICK Genetix Safety, Installation, Operation And Maintenance Manual

Feeder Control...

Limits...

Load Cells...

Tachos...
Process Control...
Analog I/O...
Digital I/O...
Totalizer...
Feeder Peripherals...
Communications...
Date & Time...
Passwords...
GCM Name...
Direct Param Edit...
Configuration...
Note: Some of the above items may not appear, depending on the Configuration settings
(see Main Menu > Advanced Setup > Configuration)
Selection of one of the entries from the above list will present further selections in each
category as shown below
Feeder Control
(Main Menu > Advanced Setup > Feeder Control)
Note: This item will appear in the menu only if Feeder Control is enabled (see Main
Menu > Advanced Setup > Configuration > Feeder Control).
Selecting this menu item, you will be presented with the following menu:
Page 29 of 104
↑
↓