Furuno DFF-3D Operator's Manual page 58

APPENDIX 1 MENU TREE
Fish Finder Alarms
Initial Setup
AP-2
Fish Alarm (OFF, ON)
Fish Alarm Level (Low, Medium, High)
Transducer Draft (0~99.9; 0)
Salt Water (OFF, ON)
Transducer Setup (Show the menu for setting up the transducer)
Transmission Power Auto (OFF, ON)
Transmission Power (0~10; 10)
External KP (OFF, ON)
Bottom Level (-40~40; 0)
Auto Gain Offset (Multi-Sounder) (-5~5; 0)
Auto Gain Offset (Side Scan) (-5~5; 0)
Auto Gain Offset (Cross Section) (-5~5; 0)
STC (Side Scan) (0~10; 5)
STC (Multi-Sounder) (0~10; 5)
TX Pulse (Short1, Short2, Std, Long)
DFF-3D Monitoring
Set Hardware to Factory Default
Reset Default Settings
Range Minimum Value (0~1200; 0m)
Range Maximum Value (0~1200; 3m)