Furuno DFF-3D Operator's Manual page 28

3. INITIAL SETTINGS
Switch
No.
1 Automatic IP address assignment
2 IP address no.
3 Restore default settings (other than
LAN)
4 Restore ALL default settings
5 - 6 Keep these switches in the OFF position.
7 No use.
8 No use.
#2
OFF
ON
After setting up the transducer for the DFF3D, set the transducer type at the NavNet
device (NavNet TZtouch/NavNet TZtouch2). See respective Installation Manual for
the procedure.
3-2
DIP switch S2 setting options (reference only)
Function
Host name
ES092021
ES092022
OFF: Fixed (static) IP address. Set the IP address
with switch #2.
ON: IP address assigned automatically.
Effective when #1 segment is OFF. (See the table
below for IP address. Currently, this function has no
use.)
See section 5.3.
See section 5.3.
172.031.092.021
172.031.092.022
Setting
IP address