Furuno DFF-3D Operator's Manual page 23

5. Unfasten the sealing nut and lock nut from the supplied super gland. As shown
below, pass the cable through the sealing nut, super gland, hole in the unit and
the lock nut.
Cable for external KP
(MPYC(SLA)-4)
6. Fasten the lock nut to fix the super gland to the unit.
7. Fasten the sealing nut into the super gland. The gap between the sealing nut end
and the super gland should be 4 mm. The fastening torque is 1.8 - 2.0 N m.
8. Position the cable so its vinyl sheath lies in the cable clamp. Use the supplied ca-
ble clamping plate to secure the cable.
Sealing nut
Super gland
4 mm
Secure cable with cable clamping plate.
Lock nut
2. WIRING
2-7