Configuration Tab Features - Extron electronics StudioStation 100 User Manual

Configuration Tab Features

The pages within
page):
Input/Output Settings — Provides a way to change the name for the input, select
1
the video format, select an aspect ratio type, and enable or disable
Memory
adjust audio levels. It also allows you to output one of several video test patterns for use
during display setup, select the refresh rate for the local HDMI output, and configure the
universal OSD content (see
EDID — Provides a way to choose the resolution and refresh rate for the HDMI input,
2
from a selection of common settings, as well as configure your own custom EDID (see
EDID
Image Settings— Provides a way to configure video input sampling and sizing, set up
3
overscanning of SMPTE input signals, and adjust picture controls (brightness, contrast,
and the like). It also allows you to save or recall input presets (see
page 43).
Encoding & Metadata — (see
4
The first expandable panel in this page makes it possible to:
Set up AV encoding.
•
Configure the streaming method, protocol, and settings.
•
Create, save, and recall encoder and streaming presets.
•
The second panel contains controls that make it possible to do the following:
Select fonts for metadata information.
•
Configure metadata elements.
•
Create, save, and recall recording profiles.
•
Designate a default recording profile.
•
Users and Roles — Provides a way to set administrator and user passwords (see
5
Users and Roles
Alarms and Traps — Provides a way to set up the e-mail server and the sender and
6
recipient e-mail addresses for notifications. Select the alarm "priority" level for each of
several types of errors or conditions monitored by the unit (see
page 51).
System Settings — (see
7
Contains an assortment of settings in ten expandable panels. An administrator can
configure settings for:
Unit identity (unit name and network location)
•
Network and serial communication
•
Storage
•
Date and time
•
This page makes it possible to:
Update firmware
•
Load a license
•
Save configurations or restore a configuration from a saved file
•
Advanced Features — Provides a way to enable a web browser client option on the
8
unit or to upload new plug-in applications (see
include the following (see
Configuration
, and . This page includes audio configuration controls to
HDCP Authorized
Input/Output Settings
on page 42).
Encoder Settings and Metadata
on page 49).
System Settings
figure 25
on page 36).
on page 53).
Advanced Features
StudioStation 100 • Web-Based User Interface
on the previous
,
Auto‑Image Auto
Image Settings on
on page 45)
Alarms and Traps on
on page 56).
35