Studiostation 100 Power Up Procedure; Record A File; Front Panel Lockout (Executive Mode) - Extron electronics StudioStation 100 User Manual

StudioStation 100 Power Up Procedure

NOTE: Before powering the StudioStation 100, ensure that all necessary devices are
Connect the power cord to a 100 to 240 VAC supply (see
page 11).

Record a File

The StudioStation 100 creates MP4, M4V, and M4A media files. Recordings are stored on
the 32GB internal storage or on storage media connected to the front, rear, or RCP 101
USB ports. The recording location defaults to the internal storage.
The internal 32GB SD card is field upgradable to different storage sizes. For instructions to
replace the SD card, see
To configure an ad hoc recording:
1.
2.
3.
4.
5.

Front Panel Lockout (Executive Mode)

To prevent accidental changes to front panel settings, enable executive mode. Executive
mode can be enabled and disabled from the front panel. Press the front panel
Mark
pages or using SIS (see
Mode)
When executive mode is enabled, any attempts to utilize the front panel buttons triggers the
Record
When executive mode is active, all functions and adjustments can still be made via USB,
RS-232, or Ethernet control (see
page 68).
NOTE: Control buttons indicate the current recording or streaming status regardless of
connected properly. Devices do not need to be powered.
Upgrading the SD Card
Press the front panel
Record
Monitor the record time and remaining time on the embedded web page.
Press to temporarily suspend recording. Press
Pause
the recording and place a chapter marker in the file.
Press to create a chapter marker and a thumbnail if desired.
Mark
Press to cease recording and place an end of file maker on the recording.
Stop
buttons simultaneously for 5 seconds. It can also be enabled or disabled from the web
System Settings
on page 76.)
, , and
Pause Stop Mark
executive mode.
Power Connection
on page 111.
button.
Pause
on page 53 or Front Panel Lock (Executive
buttons to blink 3 times.
Remote Communication and Control
StudioStation 100 • Front Panel Operation
on
again or to resume
Record
and
Stop
starting on
18