RS232 Interface
Serial Port
Parity Check
Parity check options should be the same on the scanner and the Host.
Select Odd parity: If data has an odd number of 1 bits, the parity bit
»
value is set to 0.
Select Even parity:If data has an even number of 1 bits, the parity bit
»
value is set to 0.
Select No Parity Check and parity bit will not be sent.
»
** No Parity Check
【Pro CMD:0101000】
Even Check
【Pro CMD:0101010】
nlscan.com
Code Programming ON
Code Programming OFF
Odd Check
【Pro CMD:0101020】
Tools
Page 27