Emulate Numeric Keypad - Newland NLS-FM420-MS-30 Integration Manual

USB Interface
USB HID-KBW

Emulate Numeric Keypad

"Do Not Emulate Numeric Keypad 1": Sending a number (0-9) is emulated as keystroke(s) on main
keyboard.
"Emulate Numeric Keypad 1": Sending a number (0-9) is emulated as keystroke(s) on numeric
keypad. The state of Num Lock on the simulated numeric keypad is determined by its equivalent on the
Host. If Num Lock on the Host is turned off, the output of simulated numeric keypad is function key
instead of number.
"Do Not Emulate Numeric Keypad 2": Sending "+", "－", "*" and "/" is emulated as
keystroke(s) on main keyboard.
"Emulate Numeric Keypad 2": Sending "+", "－", "*" and "/" is emulated as keystroke(s)
on numeric keypad.
** Do Not Emulate Numeric Keypad 1
【Pro CMD：1103110】
** Do Not Emulate Numeric Keypad 2
【Pro CMD：1103150】
"Emulate ALT+Keypad"prevails over "Emulate Numeric Keypad 1" and "Emulate
Numeric Keypad 2."
Supposing "Emulate Numeric Keypad 1"is enabled:umber Keyboard1":
if Num Lock on the Host is ON, "A4.5" is transmitted as "A4.5";
if Num Lock on the Host is OFF, "A4.5" is transmitted as follows:
1. "A" is sent as is because it is not included in numeric keypad;
2. "4" is sent as the function key "Cursor Move to Left";
3. "." is sent as the function key "Delete After the Cursor";
4. "5" is not sent as it does not correspond to any function key.
nlscan.com
Tools
Code Programming ON
Code Programming OFF
Emulate Numeric Keypad 1
【Pro CMD：1103120】
Emulate Numeric Keypad 2
【Pro CMD：1103151】
Page 42