Push The Start / Stop Button (Start / Stop) - Nakanishi E3000 Operation Manual

⑤ Selection of External Speed Control Mode
Procedure

1 . Push the START / STOP Button (START / STOP)

2 . is displayed. This indicates that motor rotation speed by Motor Speed Control Voltage is
possible.
Push the Error Reset Button (RESET) ⑱ to send the settings to memory,
3 . Push the Motor Speed Adjustment Button (SPEED
Indicator ⑪ . When this is indicated, it is possible to set the motor rotation speed by Pulse Signal.
Push the Error Reset Button (RESET) ⑱ to send the settings to memory,
4 . Push the
Motor Speed Adjustment Button (SPEED
Speed Indicator ⑪ .
This indicates
STOP) ⑭ .
4 - 1 . Alternately displayed are
Push the Motor Speed Adjustment Button (SPEED
Push the Error Reset Button (RESET) ⑱ to send the settings to memory,
displayed.
If you are continuously setting these parameters, push the START / STOP Button (START /
STOP) ⑭ .
4 - 2 . Alternately displayed are
Push the Motor Speed Adjustment Button (SPEED
Push the Error Reset Button (RESET) ⑱ to send the settings to memory,
displayed.
If you are continuously setting these parameters, push the START / STOP Button (START /
STOP) ⑭ .
4 - 3 . Alternately displayed are
Push the Motor Speed Adjustment Button (SPEED
Push the Error Reset Button (RESET) ⑱ to send the settings to memory,
displayed.
If you are continuously setting these parameters, push the START / STOP Button (START /
STOP) ⑭ .
4 - 4 . Alternately displayed are
Push the Motor Speed Adjustment Button (SPEED
Push the Error Reset Button (RESET) ⑱ to send the settings to memory,
If you are continuously setting these parameters, push the START / STOP Button (START /
STOP) ⑭ .
5 . Push the Error Reset Button (RESET)
6 . If you desire to set other parameters, push the
⑬ to select the parameter that needs to be set.
7 . When you are nished setting parameters, press the Error Reset Button (RESET)
the Main Power Switch ⑨ is OFF.
90
to the 4 Speed points can be set. Push the START / STOP Button (START /
and setting speed. The Speed Point
and setting speed. The Speed Point
and the setting speed. The Speed Point
and the setting speed. The Speed Point
⑱ while displayed on
⑭ .
, ) ⑬ .
, ) ⑬ .
, ) ⑬ to set the motor rotation speed.
, ) ⑬ to set the motor rotation speed.
, ) ⑬ set the motor rotation speed.
, ) ⑬ set the motor rotation speed.
to store settings.
Motor Speed Adjustment Button (SPEED
will be displayed.
displayed on Digital Speed
will be displayed.
will be displayed on Digital
can be set.
will be
can be set.
will be
can be set.
will be
can be set.
will be displayed.
⑱ , then turn
, )