Remote Control Pairing; Universal Intercom Pairing; Factory Reset; Exit Voice Configuration Menu - Sena Schuberth SC1 User Manual

14.15 Remote Control Pairing

Voice Prompt
Factory Default
Execute
To enter into Remote Control Pairing mode, tap the (+) Button
until you hear a voice prompt, "Remote control pairing". Then
tap the (-) Button to enter into Remote Control Pairing mode. The
headset will automatically exit from the configuration menu.

14.16 Universal Intercom Pairing

Voice Prompt
Factory Default
Execute
To enter into Universal Intercom Pairing mode, tap the (+) Button until
you hear a voice prompt, "Universal intercom pairing". Then tap
the (-) Button to enter into Universal Intercom Pairing mode. The
headset will automatically exit from the configuration menu.
"Remote control pairing"
N/A
Tap the (-) Button
"Universal intercom pairing"
N/A
Tap the (-) Button

14.17 Factory Reset

Voice Prompt
Factory Default
Execute
To restore factory default settings on the SC1, tap the (+) Button
until you hear a voice prompt, "Factory reset" , and tap the (-)
Button to confirm. The SC1 powers off with a voice prompt,
"Headset reset, goodbye".

14.18 Exit Voice Configuration Menu

Voice Prompt
Factory Default
Execute
To exit voice configuration menu and get back to stand-by mode,
tap the (+) Button until you hear a voice prompt, "Exit
configuration", and tap the (-) Button to confirm.
SC1
"Factory reset"
N/A
Tap the (-) Button
"Exit configuration"
N/A
Tap the (-) Button
37