Advanced Selective Pairing - A2Dp Stereo Or Handsfree - Sena Schuberth SC1 User Manual

Note:
1. If you have two audio (A2DP) devices connected to your headset then
the audio from one device will interrupt the audio from the other device.
For example, if you are playing music from the primary mobile phone,
then it can be interrupted by playing music from the secondary mobile
phone and vice versa.
2. You have to use a motorcycle specific GPS, which transmits turn-by-
turn voice instructions to the headset by Bluetooth. Most automotive
GPS systems do not have this feature.
3. The Sena SR10 is a Bluetooth two-way radio adapter for group
communication, and uses Hands-Free Profile. The incoming audio from
the two-way radio via SR10 is heard in the background while having an
intercom conversation or a mobile phone call.
4. The GPS navigation or a radar detector could be connected to the SR10 by
wire. The GPS voice instruction or the radar detector alarm is also heard in
the background via SR10 while having an intercom conversation or a phone
call. Please refer to the SR10 User's Guide for details.
5.3 Advanced Selective
Stereo or Handsfree
When you are using a smartphone, sometimes you may need to
selectively use the SC1 for A2DP stereo music only or for mobile
phone handsfree only. These instructions are for advanced users
who want to pair the SC1 to their smartphones with only one
selective profile: A2DP for stereo music of HFP for phone calls.
If you have previously paired a mobile phone to the SC1, you must
clear the previous pairing list on both devices: the mobile phone and
the SC1. To clear the pairing list on the SC1, please do a factory
reset or following the pairing list clearing procedure described in
section 14.17, "Factory Reset" or 14.14, "Delete All Bluetooth Pairing
Information". To clear the pairing list on the mobile phone, please
refer to the mobile phone manual. For most smartphones, delete the
SC1 from the list of Bluetooth devices in the settings menu.
SC1
Pairing - A2DP
13