Bluetooth headset & intercom for scooters & motorcycles (37 pages)
Summary of Contents for Sena SMH5 FM
Page 1
SMH5 FM Bluetooth ® Headset & Intercom with built-in FM tuner for Scooters and Motorcycles User's Guide www.SenaBluetooth.com...
Page 2
These trademarks may not be used without the express permission of Sena. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sena is under license. iPhone, iPod ®...
1. INTRODUCTION ..................5 8. PAIRING WITH OTHER SMH5-FM HEADSETS FOR INTERCOM CONVERSATION .................16 2. PACKAGE CONTENTS .................6 9. PAIRING WITH OTHER SENA HEADSET MODELS FOR 3. INSTALLING THE SMH5-FM ON YOUR HELMET ........7 INTERCOM CONVERSATION.............17 4. POWERING ON/OFF AND CHARGING ..........10 10.
• Bluetooth handsfree for Bluetooth mobile phones • Bluetooth stereo headset for Bluetooth stereo devices such as MP3 players Thank you for choosing the Sena SMH5-FM, Bluetooth Stereo • Bluetooth stereo headset for Bluetooth GPS navigations Headset and Intercom for scooters and motorcycles. With the SMH5- •...
SMH5-FM 2. PACKAGE CONTENTS • Clamp Unit • Headset Main Unit • Helmet Speakers • Microphone •Charging LED - Open-face Helmet Kit ∙ Attachable Boom Microphone ∙ Velcro Pad for Boom Microphone Jog Dial Phone Button ∙ Attachable Boom Microphone Holder DC Power Charging &...
SMH5-FM - Full-face Helmet Kit 3. INSTALLING THE SMH5-FM ON YOUR HELMET ∙ Wired Microphone 1. Loosen the two screws on the back plate of the clamp using the enclosed Allen Wrench. Insert the back plate of the clamp unit ∙...
Page 8
Sena recommends the clamp unit over the glued surface mounting plate. Even though the glued surface mounting plate is provided for convenience, Sena does not assume any responsibility for use of it. Users may have to use the glued plate at their own risk and responsibility.
Page 9
SMH5-FM You can use the enclosed velcro pad and holder for the boom 6. When you use the boom microphone included in the “Basic Kit”, microphone to ensure secure placement. please make sure that the fin side of the microphone is facing outward;...
SMH5-FM 4. POWERING ON/OFF AND CHARGING Note: Insert the speaker cable connector into the main unit and push the connector cover down to lock the connector in place. To power on and off the headset, you don’t need to press and hold any button for several seconds.
Then you will hear a voice prompt indicating the battery level. However, if you release the buttons as soon as the headset turns on, you will not hear the voice prompt for the battery level. *please contact Sena regarding locally approved agencies Sena accepts.
SMH5-FM 2. Search for Bluetooth devices on your mobile phone. Select the 6. PAIRING THE SMH5-FM WITH BLUE- Sena SMH5-FM in the list of the devices detected on the mobile phone. TOOTH DEVICES 3. Enter 0000 for the PIN. Some mobile phones may not ask for the PIN.
You will hear a voice prompt saying “Multipoint pairing”. connection and play. 3. Search for Bluetooth devices on the GPS navigation screen. Select the Sena SMH5-FM in the list of the devices detected on the GPS. 4. Enter 0000 for the PIN.
SMH5-FM 6.3.2 GPS Pairing as Mobile Phone 5. T he GPS confirms that pairing has completed and the SMH5-FM is ready to use. You will hear a voice prompt from the SMH5-FM If GPS is not only used for turn-by-turn voice instructions but also is saying “Your headset is paired”.
“Media selective pairing”. A2DP stereo music only or for mobile phone handsfree only. This 3. Search for Bluetooth devices on your smartphone. Select the Sena instruction is for advanced users who want to pair the SMH5-FM to SMH5-FM in the list of devices detected on your phone.
SMH5-FM 8. PAIRING WITH OTHER SMH5-FM HEADSETS FOR INTERCOM CONVERSATION The SMH5-FM can be paired with up to three other headsets for Bluetooth Intercom conversation. 1. Turn on the two SMH5-FM headsets (A and B) that you would like to pair with each other. 2.
MODELS FOR INTERCOM CONVERSATION previous Intercom friend becomes second intercom friend, and third intercom friend. The SMH5-FM can be paired with all other Sena headset models Note: such as the SMH10 and the SPH10 for intercom conversation. Please For example, after the pairing procedures listed above, headset D is the follow the same procedure as above to pair with these headset first intercom friend of headset A.
SMH5-FM The voice prompt for each menu item is as below: 10. SMH5-FM CONFIGURATION SETTING (1) Speed dial (5) Sidetone (2) RDS AF setting (6) Delete all pairings You can set the configuration of the SMH5-FM by the voice menu (3) VOX phone (7) Exit configuration instruction as below. (4) Voice prompt 1. To enter into voice configuration menu, press and hold the Jog Dial for 12 seconds until the LED shows solid blue and you hear...
1. After assigning a phone number to one of three speed dials, you can continually assign another phone number to the rest of two speed dials. 2. You can assign phone numbers to speed dials in your PC. Please visit the Sena Bluetooth web site at www.SenaBluetooth.com for more information.
SMH5-FM and tap the Phone Button to confirm. Taping the Jog Dial is not 11. USING THE SMH5-FM available for this setting. 10.7 Exit Voice Configuration Menu 11.1 Volume Adjustment Voice Prompt “Exit configuration” You can easily adjust the volume by rotating the Jog Dial. You will Factory Default hear a beep when the volume reaches maximum or minimum level.
SMH5-FM 11.3 Speed Dialing 5. To transfer a call between the mobile phone and the headset during the phone conversation, press the Phone Button for 2 seconds until You can quickly make a phone call by using the voice speed dial you hear a beep.
SMH5-FM 11.4 Intercom Conversation 6. If you want to exit the speed dial immediately, rotate the Jog Dial until you hear a voice prompt saying “Cancel”, and tap the 1. You can start an intercom conversation with any of intercom Phone Button or the Jog Dial.
SMH5-FM 11.5 Intercom and Mobile Phone Call 2. When you have an incoming intercom call during a mobile phone call, you will hear 4 high tone beeps, alerting you that there is an 1. When you have an incoming mobile phone call during an intercom incoming intercom call.
You can save FM stations to presets before using FM radio. Connect SMH5- station. FM to your PC and open the Sena Device Manager. It allows you to save FM 11.8.3 Seek and Save station frequencies up to 10 presets on the SMH5-FM setting menu.
SMH5-FM 11.9 Stereo Music 11.8.4 Scan and Save “Scan” is the function that searches from the current station frequency You can listen to stereo music by Bluetooth wireless stereo. The upward for stations in a whole range of FM frequencies. To use the Bluetooth audio device must be paired with the SMH5-FM by following scan function, please follow the procedures below: the Bluetooth Stereo Device Pairing instructions described in the 6.2...
SMH5-FM 11.10 Function Priority - To play or pause music, press and hold the Jog Dial for 1 second until you hear a double beep. The SMH5-FM operates in the following order of priority: (Highest) Mobile Phone, Intercom, Music sharing by Bluetooth stereo music, FM Radio, (Lowest) Bluetooth Stereo Music A lower priority function is always interrupted by a higher priority function.
GPS during music sharing, the function will be paused. 3. In order to share music, make sure that you update both headsets with the firmware that has the music sharing feature, and enable the EDR setting in the Sena Device Manager.
The SMH5-FM can be paired with non-Sena Bluetooth headsets for Bluetooth intercom conversation. You can pair the SMH5-FM with only one non-Sena Bluetooth headset; if you pair with a different non- Sena Bluetooth headset, the previous pairing list will be removed.
You can initiate the Universal Intercom connection with non-Sena software downloads. Bluetooth headsets using the same intercom connection method as you would between other Sena headsets. You may single tap the Jog Dial to begin an intercom conversation with the first intercom friend, double tap with the second intercom friend, and triple tap with the third intercom friend.
SMH5-FM CERTIFICATION AND SAFETY APPROVALS Type Operation Button Duration Beep High tone double Jog Dial 3 sec — FCC Compliance Statement beeps Save or delete Rotating the Jog Dial to select preset number from 1 to 10 or This device complies with part 15 of the FCC rules. Operation is subject to preset cancel (FM mode)
® The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. FCC Caution and any use of such marks by Sena is under license. Other trademarks and trade names are those of their respective owners. Any changes or modifications to the equipment not expressly approved ®...
SMH5-FM WEEE (Waste Electrical and Electronic Equipment ) SAFETY INFORMATION The crossed-out wheel bin symbol on the product, Please ensure that the product is properly used by observing the literature, or packaging reminds you that all electrical warnings and cautions below to prevent any risk and/or damage to and electronic products, batteries, and accumulators property.
SMH5-FM Product Use • Do not use the product near hazardous explosives. When there are near any explosion hazards, turn off the power and heed any • In some regions, it is prohibited by law to ride motorcycles or bicycles regulations, instructions, and signs in the area.
Here, product warranty extends to the product sub-zero temperature, because it may cause serious reduction of the only. Sena will not be liable for any loss, damage of human life, or loss of battery performance. property which may result from using the product beyond defective parts •...
Page 37
By buying and using this product, you relinquish considerable legal rights of Sena (collectively referred to as "the company") recommend that, including any claim for compensation for damages. Therefore, be certain before using the product and similar devices of any brands including...
AT SENA’S OPTION. THIS DISCLAIMER OF LIABILITY FOR DAMAGES WILL you use the product. Further, Sena will not be liable for any substantial NOT BE AFFECTED IF ANY REMEDY PROVIDED HEREIN SHALL FAIL OF damage not related to the, condition, environment, or malfunction of the ITS ESSENTIAL PURPOSE.
In addition to damages which may occur due to the use of the product, To obtain product warranty service, send the defective product, at your Sena will not be liable for damages of the product which occur due to the expense, to the manufacturer or the seller along with proof of purchase following events.
Unless you return the product within 14 days from the purchase date, you will have read and agreed to all the terms and conditions explained above, and Sena will not be liable for any claim for damages related with the product.
Page 41
1.4.0 www.SenaBluetooth.com User's Guide for Firmware v2.0...
Need help?
Do you have a question about the SMH5 FM and is the answer not in the manual?
Questions and answers