Sena Schuberth SC1 User Manual page 47

SC1
• Any 3rd party USB charger can be used with Sena products if
the charger is approved by either the FCC, CE, IC or other
locally approved agencies that Sena accepts.
• Do not use cigarette chargers other than the included cigarette
charger to charge the headset.
• Store the battery at temperatures of 15°C~25°C (59°F~77°F).
Higher or lower temperatures may reduce the capacity and life
of the battery, or may cause temporary non-operation. Do not
use the product in sub-zero temperature, because it may cause
serious reduction of the battery performance.
• If you apply heat to the batter y or throw it into fire, it may explode.
• Do not use the product with a damaged battery. It may explode
and/ or cause accidents.
• Never use a damaged charger. It may explode and/or cause
accidents.
• Battery life may vary depending on conditions, environmental
factors, functions of the product in use, and devices used with it.
46
PRODUCT WARRANTY AND DISCLAIMER
Limited Warranty
Limited Warranty
Schuberth guarantees the product quality based on the technical
specification stated in the product manual, and data regarding
product warranty. Here, product warranty extends to the product only.
Schuberth will not be liable for any loss, damage of human life, or
loss of property which may result from using the product beyond
defective parts or flaws that occur due to problems in manufacture.
Warranty Period
Schuberth guarantees free-of-charge replacements of defective parts
of the product or flaws that may have occurred due to problems in
manufacture for a period of 2 years from the date of initial purchase.
Termination
Quality warranty of the product becomes effective on the date of
initial purchase. In addition, the quality warranty of the product
expires when the warranty period expires. However, in the
following cases, the warranty will be terminated prematurely.
• In the event the product has been sold or transferred to a third party.
• In the event the manufacturer's name, serial number, product
label, or other markings have been modified or removed.