14.9 Enabling/Disabling Advanced Noise Control™
Voice Prompt
Factory Default
Enable
Disable
When Advanced Noise Control is enabled, the background noise is
reduced during an intercom conversation. When it is disabled, the
background noise is mixed with your voice during intercom.
Note:
If you use your 10S with the Bluetooth Audio Pack for GoPro, you can
enable or disable this feature only during Normal Audio Recording Mode.
This feature is automatically disabled while in Ultra HD (UHD) Audio Mode.
"Noise control"
Enable
Tap the Phone Button
Tap the Jog Dial
14.10 Delete All Bluetooth Pairing Information
Voice Prompt
Factory Default
Execute
To delete all Bluetooth pairing information of the 10S, rotate the Jog
Dial until you hear a voice prompt, "Delete all pairings", and tap the
Phone Button to confirm.
14.11 Remote Control Pairing
Voice Prompt
Factory Default
Execute
To enter into Remote Control Pairing mode, rotate the Jog Dial until you
hear a voice prompt, "Remote control pairing". Then tap the Phone
Button to enter into Remote Control Pairing mode. The headset will
automatically exit from the configuration menu.
10S
"Delete all pairings"
N/A
Tap the Phone Button
"Remote control pairing"
N/A
Tap the Phone Button
43