Group Intercom - Sena Schuberth SC1 User Manual

2. When you have an incoming intercom call during a mobile
phone call, you will hear 4 high toned beeps, alerting you that
there is an incoming intercom call. You will also hear a voice
prompt, "Intercom requested". In this case, the intercom call
does not override the mobile call because intercom has lower
priority than mobile call. You have to hang up the mobile
phone call to make or receive an intercom call.
3. You can have a three-way conference phone call by adding an
intercom friend to the mobile phone conversation. During a
mobile phone conversation, tap the (-) Button within the intercom
menu to invite one of the intercom friends to the mobile phone
line. To disconnect the intercom or the phone call, you must wait
for the other caller to hang up or end the intercom conversation.

10 GROUP INTERCOM

Group Intercom allows you to instantly create a multi-way conference
intercom with three other most recently paired headsets.
1. Go through intercom pairing with up to three headsets you
want to have Group Intercom with.
2. Press and hold the (-) Button for 1 second within the intercom
menu to begin Group Intercom. The LED will flash blue and
red simultaneously and you will hear a voice prompt, "Group
intercom".
3. To terminate Group Intercom, press the (-) Button for 3
seconds during Group Intercom. You will hear a voice prompt,
"Group intercom terminated".
Note:
Group Intercom supports SC1, 10Upad, 10U, 10C, 10R, 10S, 20S, and
Tufftalk only. Other headsets will be excluded from Group Intercom.
SC1
23