Mobile Phone Pairing - Mobile Phone, Bluetooth Stereo Device; Second Mobile Phone Pairing - Second Mobile Phone, Gps, And Sr10 - Sena Schuberth SC1 User Manual

SC1
5.1 Mobile Phone Pairing
Bluetooth Stereo Device
1. Press and hold the (+) Button or the (-) Button for 10 seconds
until you hear the voice prompt, "Configuration menu".
2. Tap the (+) Button until you hear a voice prompt, "Phone pairing".
3. Search for Bluetooth devices on your mobile phone. Select the
SC1 in the list of the devices detected on the mobile phone.
4. Enter 0000 for the PIN. Some mobile phones may not ask for
the PIN.
5. The mobile phone confirms that pairing has completed and the
SC1 is ready to use. You will hear a voice prompt, "Your
headset is paired".
6. If the pairing process is not completed within three minutes,
the SC1 will return to stand-by mode.
Note:
1. If a Bluetooth connection between the headset and a mobile phone is
disconnected, press the (+) Button for 3 seconds until you hear a high
tone single beep to recover the Bluetooth connection immediately.
2. If the Bluetooth connection between the headset and a media player is
disconnected, press the (+) Button for 1 second to recover the Bluetooth
connection and play.
12
- Mobile Phone, 5.2 Second Mobile Phone Pairing - Second
Mobile Phone, GPS, and SR10
Typical Bluetooth headsets can connect with only one Bluetooth
device, but a second mobile phone pairing allows the headset to
connect with another Bluetooth device such as a second mobile
phone, an MP3 Player, or the Sena SR10, the Bluetooth adapter.
1. To enter the voice configuration menu, press and hold the (+)
Button or the (-) Button for 10 seconds until you hear the
voice prompt, "Configuration menu".
2. Tap the (+) Button until you hear a voice prompt, "Second
mobile phone pairing".
3. Search for Bluetooth devices on your mobile phone. Select the
SC1 in the list of the devices detected on the mobile phone.
4. Enter 0000 for the PIN. Some mobile phones may not ask for
the PIN.
5. The mobile phone confirms that the pairing has completed
and the SC1 is ready to use. You will hear a voice prompt,
"Your headset is paired".