Certification And Safety Approvals; Fcc Compliance Statement - Sena Schuberth SC1 User Manual

SC1
Type Function
Press the (-) Button for
FM radio on/off
5 seconds
Press the (+) Button for
FM Radio Select preset
3 seconds
Press the (+) Button for
Seek up
1 second
42
Button Command LED
-
-
-

CERTIFICATION AND SAFETY APPROVALS

Beep
Mid-tone

FCC Compliance Statement

double beeps
This device complies with part 15 of the FCC rules. Operation is
Mid-tone
single beep
subject to the following two conditions:
High tone
(1) This device may not cause harmful interference, and
triple beeps
(2) This device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits
for a Class B digital device pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment on and
off, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antennae
• Increase the separation between the equipment and the receiver