Enabling/Disabling Voice Activated Intercom; Enabling/Disabling Hd Intercom - Sena Schuberth SC1 User Manual

14.9 Enabling/Disabling Voice Activated Intercom

Voice Prompt
Factory Default
Enable/Disable
If this feature is enabled, you can initiate an intercom conversation
with the last connected intercom friend by voice. When you want to
start intercom, say a word such as "Hello" loudly or blow air into the
microphone. If you start an intercom conversation by voice, the
intercom terminates automatically when you and your intercom friend
remain silent for 20 seconds. However, if you manually start an
intercom conversation by tapping the (-) Button within the intercom
menu, you have to terminate the intercom conversation manually.
However, if you start intercom by voice and end it manually by pressing
and holding the (-) Button for 3 seconds, you will not be able to start
intercom by voice temporarily. In this case, you have to tap the (-) Button
within the intercom menu to restart the intercom. This is to prevent
repeated unintentional intercom connections by strong wind noise. After
rebooting the SC1, you can start intercom by voice again.
"VOX intercom"
Disable
Tap the (-) Button

14.10 Enabling/Disabling HD Intercom

Voice Prompt
Factory Default
Enable/Disable
HD Intercom enhances the two-way intercom audio from normal
quality to HD quality. HD Intercom will become temporarily disabled
when you enter into a multi -way intercom. If this feature is disabled,
the two-way intercom audio will change to normal quality.
Note:
The intercom distance of HD Intercom is relatively shorter than that of
normal intercom.
SC1
"HD intercom"
Enable
Tap the (-) Button
35