Intercom Pairing - Sena Schuberth SC1 User Manual

SC1

8.1 Intercom Pairing

8.1.1 Pairing with Other SC1 Headsets for
Intercom Conversation
The SC1 can be paired with up to three other headsets for
Bluetooth intercom conversation.
1. Turn on the two SC1 headsets (A and B) that you would like
to pair with each other.
2. Press and hold the (-) Button for 1 second to enter the
intercom menu.
3. Tap the (+) once, and you will hear a mid-tone single beep
and the voice prompt, "Intercom pairing".
18
4. Simply tap the (+) Button of any one of the two headsets A or B and
wait until the LEDs of both headsets turn to blue and intercom
connection is automatically established. The two SC1 headsets A and
B are paired with each other for intercom conversation. If the pairing
process is not completed within one minute, the SC1 will
return to stand-by mode.
B
Pairing A & B
5. You can make other pairing between headsets A and C, and
between headsets A and D by following the same procedure
as above.
A
D
C