Sena 10U for Arai Full-face Helmets Quick Start Guide
- Manual (72 pages) ,
- User manual (65 pages) ,
- Quick start manual (8 pages)
Advertisement
- 1 Overview
- 2 Installation
- 3 Charging
- 4 Getting Started
- 5 Button Operation
- 6 Power On/Off
- 7 Remote Control Pairing
- 8 Volume Adjustment
- 9 Phone, Music Pairing
- 10 Music Operation
- 11 Mobile Phone Call Making and Answering
- 12 Intercom Pairing
- 13 Intercom Start/End
- 14 Radio On/Off
- 15 Radio Seek Stations
- 16 Radio Scan Up FM Band
- 17 Radio Move to Preset Station
- 18 Radio Save or Delete Preset
- 19 Setting
- 20 Troubleshooting
- 21 Videos
- 22 Documents / Resources
Overview
Installation
Charging
Getting Started
Remove the plastic tape from the battery slot to begin using the Remote Control.
Button Operation
Power On/Off
Headset
Remote Control
Power On
Deep Sleep
Remote Control Pairing
NOTE:
You can control the headset using the Remote Control only after you pair them together.
Volume Adjustment
Phone, Music Pairing
Music Operation
Mobile Phone Call Making and Answering
Intercom Pairing
Intercom Start/End
1st Friend
2nd Friend
3rd Friend
Radio On/Off
Radio Seek Stations
Radio Scan Up FM Band
Save to preset while scanning
Radio Move to Preset Station
Radio Save or Delete Preset
Setting
Configuration Menu
Using the Sena Device Manager
Connect the headset to your computer via a USB cable. Launch the Sena Device Manager and click DEVICE SETTING to configure the headset settings.
For details about downloading the Sena Device Manager, please refer to the leaflet included in the package.
Using the Sena Smartphone App
- On your smartphone, download the Sena Smartphone App for Android or iPhone from Google Play or App Store. Please refer to www.sena.com for more details.
- Pair your smartphone with the headset.
- Run the Sena Smartphone App. Swipe the screen to the right and tap Setting to configure the headset settings.
Troubleshooting
Remote Control Disconnection
If the Remote Control becomes disconnected with your headset, replace the Remote Control's battery or go through the pairing process again. Meanwhile, you can use the headset control buttons to operate the headset. Please refer to the User's Guide at www.sena.com for details on headset control button operations.
Factory Reset
If you want to restore the 10U to factory default settings, use the Factory Reset in the configuration menu. The headset automatically restores the default settings and turns off.
Fault Reset
If the 10U is not working properly for any reason, reset by gently pushing the pin-hole reset button located on the battery.
Sena Technologies, Inc.
www.sena.com
Customer Support: support.sena.com
VideosSena 10U Bluetooth Headset Review Video
Documents / ResourcesDownload manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download Sena 10U for Arai Full-face Helmets Quick Start Guide
Advertisement
Need help?
Do you have a question about the 10U and is the answer not in the manual?
Questions and answers